|
| |
TM 9-2320-360-34-1
3-7. DDEC II SYNCHRONOUS REFERENCE SENSOR (SRS) AND TIMING
REFERENCE SENSOR (TRS) REPLACEMENT/ADJUSTMENT (CONT)
(10)
Tap end of camshaft pulley (15) to take up
end play.
(11)
Insert alignment tool (16) between TRS
(17) and double teeth (18) on pulse wheel
(19).
(12)
Loosen two sockethead screws (20).
(13)
Loosen screw (21).
NOTE
Ensure alignment tool surface is
flush with double teeth and TRS.
(14)
Move bracket (22) to align end of TRS
(17) with groove in alignment tool (16).
(15)
Tighten two sockethead screws (20).
(16)
Tighten screw (21) while pushing TRS
(17) toward pulse wheel (19).
(17)
Remove alignment tool (16) from pulse
wheel (19).
(18)
Remove screw (9), washer (8), clamp (7),
and timing tool (5) from injector bore (6).
d.
Follow-On Maintenance
(1)
Install no. 1 right fuel injector (para 4-2).
(2)
Install ECM (TM 9-2320-360-20).
(3)
Clear historical codes (para 2-4).
3-64 Change 3
|
