|
| |
TM 9-2320-360-34-1
3-6. ENGINE BLOCK BREATHER TUBE REPLACEMENT
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
Initial Setup:
Equipment Conditions
Materials/Parts
Blower removed (para 4-6).
Gasket (Item 45, Appendix F)
Lockwashers (2) (Item 118, Appendix F)
Tools and Special Tools
Tool Kit, Genl Mech (Item 202, Appendix E)
a.
Removal
(1)
Remove two screws (1), lockwashers (2),
elbow (3), and gasket (4) from cylinder
head
(5).
Discard
gasket
and
lockwashers.
(2)
Remove two damps (6) and hose (7) from
elbow (3) and pipe (8).
(3)
Remove pipe (8) from engine block (9).
b.
Installation
NOTE
When properly installed, top of pipe
will be 4.5 in. (114 mm) above
cylinder block.
(1)
Install pipe (8) in engine block (9).
(2)
Install hose (7) with two clamps (6) on
pipe (8) and elbow (3).
(3)
Install new gasket (4) and elbow (3) on
cylinder
head
(5)
with
two
new
lockwashers (2) and screws (1).
c.
Follow-On Maintenance
Install blower (para 4-6).
3-60
|
