|
| |
TM 9-2320-360-34-1
3-5. ENGINE REPLACEMENT (CONT)
(39)
Position two new lockwashers (71), two
screws (72), new lockwasher (73), and
screw (74) on steering pump adapter (75)
and engine (20).
(40)
Remove two guide screws (66) from
engine (20).
(41)
Position two remaining screws (72) and
new lockwashers (71) through adapter
housing (76) into engine (20) while
assistant operates lifting device.
(42)
Tighten four screws (72) to 73-83 lb-ft (99-
113 Nm) using crow's foot wrench.
(43)
Tighten screw (74) to 48-58 lb-ft (65-79
Nm) using crow's foot wrench.
(44)
Remove lifting device from steering pump
(67).
NOTE
Hose no. 2628 from air compressor to
elbow is 27 in. (68 cm) long. Hose
no. 2628 from air compressor to
fitting is 30 in. (76 cm) long.
(45)
Install
hose
no.
2628
(77)
on
air
compressor (56) and elbow (78).
(46)
Install
hose
no.
2628
(79)
on
air
compressor (56) and fitting (80).
3-58
|
