|
| |
TM 9-2320-360-34-1
(5)
Loosen clamp (16) and remove deareation
hose (17) from radiator (18).
(6)
Loosen two clamps (19) and remove two
upper radiator hoses (20) from radiator
(18).
(7)
Loosen clamp (21) and remove bypass
hose (22) from radiator (18).
CAUTION
Do not completely remove nuts from
tie rods. Failure to comply will allow
hood to pull radiator forward and
damage to radiator and hood may
result.
NOTE
Right and left tie rods are the same.
Left tie rod is shown.
(8)
Loosen two outside nuts (23) on tie rods
(24) until nuts (23) are flush with ends of
tie rods (24).
(9)
Tighten two inside nuts (25) on tie rods
(24) against tie rod supports (26) until
radiator (18) is positioned upright.
(10)
Tighten two outside nuts (23) on tie rods
(24) against tie rod supports (26).
3-5
|
