|
| |
TM 9-2320-360-34-1
WARNING
Wear approved eye protection when
performing transmission pressure
checks. Failure to comply may
result in oil getting into eyes. If oil
contacts
eyes,
seek
medical
attention immediately.
MAIN PRESSURE TEST
(1) Remove main pressure oil line no. 2672
from main pressure port on transmission
converter housing.
(2) Install tee, 0-2000 psi (0-13,790 kPa)
pressure gage, and main pressure oil line
no. 2672 in main pressure port on
converter housing.
(3) Start engine (TM 9-2320-360-10) and run
at idle.
(4) With parking brake applied, position
transmission range selector to 2-5
position.
(5) Check reading on pressure gage.
(6) Shut off engine (TM 9-2320-360-10).
(7) Remove pressure gage from main
pressure oil line and install main pressure
oil line on main pressure port.
2-121 (2-122 blank)
|
