|
| |
TM 9-2320-360-34-1
LOCKUP PORT TEST
NOTE
PTO and engine brake switches must be in the OFF
position before beginning this test.
(1) Remove hose no. 2646 from lockup port on transmission.
(2) Plug hose no. 2646 and lockup port on transmission.
(3) Attempt to start engine (TM 9-2320-360-10) and run at
idle.
(4) Position transmission range selector to 2-5 position.
(5) Position transmission range selector to R (reverse) position.
(6) Position transmission range selector to N (neutral) position.
(7) Shut off engine (TM 9-2320-360-10).
(8) Remove plugs from hose no. 2646 and lockup port on
transmission.
(9) Install hose no. 2646 on transmission lockup port.
2-117
|
