|
| |
TM 9-2320-360-34-1
(1)
Fabricate from 1/2 x 6 in. (13 x 152 mm) cold rolled steel.
(2)
Thread size is 7-16 x 1 in. (25 mm) long.
(3)
Heat unthreaded end and bend over 1-1/4 (32 mm) diameter rod.
(4)
All dimensions are inches (millimeters).
Figure C-8. Lifting Eyes (PN 2BH944)
(1)
Fabricate from 1/2 x 6 in. (13 x 152 mm) cold rolled steel.
(2)
Thread size is 10-1.5 x 25 mm (1 in.) long.
(3)
Heat unthreaded end and bend over 1-1/4 (32 mm) diameter rod.
(4)
All unlabeled dimensions are inches (millimeters).
Figure C-9. Lifting Eye (10 mm)
C-6
|
