|
| |
TM 9-2320-360-34-1
BLOWER BYPASS VALVE
TEST
(1) Remove blower bypass
valve (para 4-7).
(2) Blower bypass valve piston should
move open with hand pressure, and
spring should return piston to
closed position.
(3) Install blower bypass valve
(para 4-7).
STE/ICE TEST #32
(1) Connect STE/ICE test cable to
STE/ICE receptacle.
(2) Set test select switch to 32.
(3) Start engine (TM 9-2320-360-10).
(4) Press and hold test button until CAL
appears on display.
(5) Release test button and wait for offset
value to appear on display.
(6) Press and release test button to obtain
test results.
(7) Shut off engine (TM 9-2320-360-10).
AIR INTAKE PORT INSPECTION
(1) Remove air box covers (para 3-8).
(2) Check cylinder liner air inlet ports for
restrictions.
(3) Install air box covers (para 3-8).
Change 2 2-83
|
