|
| |
TM 9-2320-360-34-1
(11)
Remove hose no. 2852 (21) from elbow
(22).
(12)
Remove hose no. 2934 (23) from elbow
(24).
(13)
Remove electrical connector (25) from
PTO switch (26).
(14)
Remove screw (27) from PTO (8) and
transmission (28).
NOTE
It may be necessary to loosen all five
nuts and raise PTO slightly to remove
nuts.
(15)
Remove five nuts (29) and washers (30)
from studs (31). Discard washers.
(16)
Remove PTO (8) and gasket (32) from
transmission (28). Discard gasket.
b.
Installation
(1)
Position new gasket (1) and PTO (2) on
transmission (3).
(2)
Install fi ve new washers (4) and nuts (5)
on studs (6). Torque to 32-37 lb-ft. (43-50
Nm).
(3)
Install
screw
(7)
in
PTO
(2)
and
transmission (3).
Change 1 17-43
|
