| |
TM 9-2320-360-34-1
(1)
Fabricate from 1/8 In. (3.2 mm) diameter steel welding rod or equivalent stiff wire.
(2)
Using cutting pliers, cut welding rod to 6 in. (150 mm) length or longer.
(3)
Using machinist's vise, bend 1/2 In. (13 mm) length of rod 90 degrees.
(4)
All dimensions are in inches (millimeters).
Figure C-6. Wire Hook
(1)
Fabricate from flat shim stock 0.02 x 3/32 x 30 in. (0.5 x 2.38 x 762 mm).
(2)
Cut shim stock into ten 3 in. (76.2 mm) pieces.
(3)
All dimensions are in inches (millimeters).
Figure C-7. Shims
C-5
|