|
| |
TM 9-2320-360-34-1
b.
Installation
(1)
Install new preformed packing (1), fitting
(2) two new preformed packings (7), and
fittings (8) on hydraulic pump (3).
(2)
Install two new preformed packings (5),
elbows (6), new preformed packing (4),
and fitting (8.1) on hydraulic pump (3).
(3)
Attach two straps (9) to hydraulic pump
(3).
WARNING
Hydraulic pump weighs 80 lb (36 kg).
Support hydraulic pump to prevent it
from falling while installing screws.
Failure to comply may result in injury
to personnel.
(4)
Position and support hydraulic pump (3)
on frame (10) with aid of assistant.
(5)
Install two screws (11), new lockwashers
(12), and nuts (13) in hydraulic pump (3)
and frame (10). Do not tighten.
(6)
Remove two straps (9) from hydraulic
pump (3).
(7)
Position support plate (14) on hydraulic
pump (3) with new lockwasher (15) and
nut (16). Do not tighten.
Change 1 17-39
|
