|
| |
TM 9-2320-360-34-1
(11)
Pull transmission shift cable (21) out of
cab (3).
CAUTION
U-bolt must be located in notch on
cable. Failure to comply may result
in damage to equipment.
NOTE
Transmission selector must be in
reverse position and transmission
shift
lever
rotated
to
full
counterclockwise
position
before
doing step (12).
(12)
Install bracket (22), transmission shift
cable (21), and U-bolt (23), on support
bracket (24) with two new lockwashers
(25) and nuts (26).
(13)
Install
pin
(27)
in
yoke
(28)
and
transmission shift lever (29).
(14)
Install new cotter pin (30) in pin (27).
Change 3 16-22.1/(16-22.2 blank)
|
