|
| |
TM 9-2320-360-34-1
15-5. REAR SUSPENSION ARM REPLACEMENT (CONT)
NOTE
Screw, washer, and outside collar are
installed together on axle no. 4 only.
(6) Install suspension arm (2) on axle (5) with two
new collars (9), new washers (10), and new
screw (11) with aid of assistant.
WARNING
Adhesive-sealant can burn easily,
can give off harmful vapors, and Is
harmful to skin and clothing. To
avoid
Injury
or
death,
keep
compound away from open fire and
use In well-ventilated area. If
adhesive-sealant gets on skin or
clothing, wash Immediately with soap
and water.
(7) Coat threads of screw (11) with adhesive-
sealant.
(8) Install new locknut (12) on screw (11). Torque
to 495 lb-ft ( 671 Nm).
(9) Remove floor jack (4) from suspension arm (2).
(10)
Install air spring (13) on spring plate (14) and
suspension arm (2).
15-22
|
