|
| |
TM 9-2320-360-20-1
WARNING
Dry cleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and
gloves and use only in a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and don't breathe vapors. DO NOT use near open flame or excessive heat.
The flash point is 100-138°F (38-59°C). If you become dizzy while using cleaning
solvent, get fresh air immediately and medical aid. If contact with eyes is made,
wash your eyes with water and get medical aid immediately.
(b)
Clean all exterior surfaces coated with rust-preventive compound with dry cleaning solvent.
(2)
Special Procedures
(a)
Activate battery if HET Tractor is delivered with dry-charged battery (TM 9-6140-200-14).
(a1)
Connect batteries (para 7-61).
(b)
Do the semiannual Preventive Maintenance Checks and Services (PMCS) (para 2-8).
(c)
Lubricate specific points shown in LO 9-2320-360-12 regardless of interval. Do not lubricate gear cases or
engine. Check processing tag for gear case and engine oil. If tag states the oil is good for 500 mi (805 km) of
operation and is of the proper grade for local climatic operation, do not change oil.
(d)
Schedule a semiannual service in accordance with DA Pam 738-750
(e)
HET Tractor Body and Sheet Metal
Inspect body and sheet metal for evidence of damage during shipment.
Check doors, latches, and hinges on compartments for proper operation.
Check mounting hardware and tighten as necessary.
(f)
HET Tractor Cab
Inspect cab for evidence of damage during shipment.
Inspect windshields and window glass for cracks or other damage.
Check door latches, hinges, and windows for proper operation.
Check seats and seat belts to see that they are securely installed, and that the operator's
seat adjustments are functioning properly.
(g)
Engine
Remove any seals, plugs, or tape used to seal air inlets and ports on the engine during shipping.
Check crankcase oil level with dipstick.
Examine air cleaner element for dirty or restricted condition.
Inspect engine and cooling hose connections for evidence of leakage.
Clean away any obstruction to cooling air flow to radiator.
Change 2 2-3
|
