|
| |
TM 9-2320 -356-BD
Procedural
Option 1:
1.
Make a
2.
Thread
3.
Secure
4.
Record the BDARaction taken. When the mission is completed, as soon as
Steps:
Be sure to select a length where the cable splices
will not restrect the range of cable travel.
Loop and Cable Clamp.
NOTE
loop at the end of one cable.
the other cable end through the loop, and make another loop.
both loops as shown.
practicable, repair using standard maintenance procedures.
Option 2:
Cable Clamps.
1.
Splice cable with two clamps.
2.
Connect the other cables by looping through the tie. The end of the cable
should extend at least 1/2 inch beyond the clamp as shown.
3.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable, repair using standard maintenance procedures.
3-16
|
