|
| |
TM 9-2320-356-BD
10-9.
FRONT AXLE DAMAGED
General Information:
The front axle is necessary for a vehicle to have a 100% load carrying and pulling
c a p a b i l i t y.
If the axle shafts or the gears in the third member are damaged, the
vehicle can still be used.
Limitations:
o Degraded mobility and terrain capability
Personnel/Time required:
o 1 s o l d i er
o 30-45 minutes
Materials/Tools:
o Various open-end box
wrenches
Procedural steps:
Option 1:
2-1/2- and 5-ton.
1.
Disconnect the hub on the front drums.
2.
Disconnect the propeller shaft from axle to transfer case.
3.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable, repair using standard maintenance procedures.
Option 2: CUCV.
1.
Put front hubs in free position.
2.
Remove propeller shaft from axle to transfer case.
3.
Shift transfer case into two-wheel mode.
4.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable,
repair using standard maintenance procedures.
10-10.
DRIVE LINE DAMAGED
General Information:
The drive line or propeller shaft in a vehicle must be straight and free of any
damage to perform at full load capacity.
Most tactical wheeled vehicles utilize
more than two drive lines to drive the different axles.
Removal of a damaged drive
can greatly decrease the capability of the vehicle. A combat damaged drive line
can be repaired using the following procedure.
10-7
|
