|
| |
TM 9-2320-356-BD
2.
Remove the axle shafts and carrier from the rear rear axle housing.
3.
Install the rear rear carrier into front rear axle housing.
4.
Install axle shafts into both housings.
5.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable, repair using standard maintenance procedures.
Option 2.
Rear rear axle carrier damaged.
1.
Remove both axle shafts.
2.
Remove propeller shaft.
3.
Make cardboard cover and install on hub.
4.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable, repair using standard maintenance procedures.
10-8. AXLE SHAFTS AND CARRIER DAMAGED ON FRONT REAR AND REAR REAR AXLES
General Information:
With no rear axles in working condition, the vehicle must drive off the front axle
only.
Limitations:
o Degraded speed
o T e r r a i n r e s t r i c t i o ns
Personnel/Time required:
o 2 soldiers
o 2-4 hours
Procedural steps:
1.
Remove all axle shafts.
2.
Remove propeller shaft.
3.
Make a cardboard cover and install on hub.
Materials/Tools:
o Cardboard
4.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable, repair using standard maintenance procedures.
10-6
|
