Rocker Shaft and Pushrod

TM 9-2320-312-24-2

Truck Engine

Disassembly and Assembly Section

Installation Procedure

g00611576

Illustration 180

g00611578

Illustration 178

4. Connect plug (1) to the wiring harness.

1. Ensure that the mating surface of base (3) of the

End By:

valve mechanism cover and the cylinder head

are thoroughly clean.

a. Install the valve mechanism cover. Refer to

Disassembly and Assembly, "Valve Mechanism

2. Position base (3) of the valve mechanism cover

Cover - Remove and Install".

on the cylinder head. Install the bolts and tighten

the bolts in a numerical sequence to a torque of

12 3 Nm (106 27 lb in).

i01152050

Rocker Shaft and Pushrod -

Remove

SMCS Code: 1102-011; 1208-011

Removal Procedure

Start By:

a. Remove the valve mechanism cover. Refer to

Disassembly and Assembly, "Valve Mechanism

Cover - Remove and Install".

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened

component life.

g00611577

Illustration 179

3. Connect wiring harness plugs (2) to each of the

unit injectors.