Engine Oil Filter Base

TM 9-2320-312-24-2

Truck Engine

Disassembly and Assembly Section

End By:

i01156991

Engine Oil Filter Base -

a. Install the engine oil filter base. Refer to

Assemble

Disassembly and Assembly, "Engine Oil Filter

Base - Install".

SMCS Code: 1306-016

i01747122

Assembly Procedure

Engine Oil Filter Base - Install

NOTICE

SMCS Code: 1306-012

Keep all parts clean from contaminants.

Installation Procedure

Contaminants may cause rapid wear and shortened

component life.

Table 19

Required Tools

1. Inspect the condition of the O-ring seals.

Part

Replace the O-ring seals, if necessary. The

Tool

Part Description

Qty

Number

contact surfaces of the O-ring seals must be

clean and dry.

185-3630

Strap Wrench Assembly

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened

component life.

g00615004

Illustration 91

2. Install O-ring seals (5) on plugs (2). Apply clean

engine oil on O-ring seals (5).

g00614997

Illustration 93

1. Position the gasket and engine oil filter base

(3) over the engine oil cooler. Install the bolts

that hold engine oil filter base (3) to the cylinder

block.

2. Connect tube (2) to engine oil filter base (3).

g00615003

Illustration 92

3. Apply clean engine oil on valves (3). Install

valves (3), springs (4), and plugs (2) in engine

oil filter base (1).