Engine Oil Filter Base

TM 9-2320-312-24-2

Truck Engine

Disassembly and Assembly Section

Installation Procedure

i01747103

Engine Oil Filter Base -

Table 17

Remove

Required Tools

Part

Tool

Part Description

SMCS Code: 1306-011

Qty

Number

149-6115

Installer

Removal Procedure

133-9306

Valve Guide

Table 18

Required Tools

NOTICE

Keep all parts clean from contaminants.

Part

Tool

Part Description

Qty

Number

Contaminants may cause rapid wear and shortened

185-3630

Strap Wrench Assembly

component life.

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened

component life.

NOTICE

Care must be taken to ensure that fluids are contained

during performance of inspection, maintenance, test-

ing, adjusting and repair of the product. Be prepared to

collect the fluid with suitable containers before open-

ing any compartment or disassembling any compo-

nent containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar

Tools and Shop Products Guide" for tools and supplies

suitable to collect and contain fluids on Caterpillar

products.

Dispose of all fluids according to local regulations and

g00615567

mandates.

Illustration 86

1. Turn Tooling (A) upside-down and use Tooling

(A) and a press to install the valve seat inserts

in the cylinder head assembly.

End By:

a. Install the inlet valves and exhaust valves.

Refer to Disassembly and Assembly, "Inlet and

Exhaust Valves - Remove and Install".

g00614994

Illustration 87

1. Remove oil filter assembly (1) with Tooling (A).