Air Inlet Heater Solenoid - Remove and Install

TM 9-2320-312-24-2

Truck Engine

Disassembly and Assembly Section

Installation Procedure

4. Position oil level gauge (1) and install eight bolts

(4).

5. Connect ground strap (5) to the air inlet cover.

6. Connect wire (3) to the solenoid of the air inlet

heater. Tighten the nut to a torque of 6 0.5 Nm

(53 4 lb in).

7. Connect harness assembly (2) to the air

temperature sensor.

8. Install hose assembly (7) on air inlet elbow (6).

i01745600

g00618344

Illustration 75

Air Inlet Heater Solenoid -

Remove and Install

1. Position air inlet heater solenoid (3) and install

two bolts (4).

SMCS Code: 1090-010-OD

2. Connect the wiring harness (2). Install the wire

assembly to air inlet heater solenoid (3). Tighten

Removal Procedure

nut (1) to a torque of 6.0 0.5 Nm (53 4 lb in).

i01745642

Air Inlet Cover - Remove and

Install

SMCS Code: 1087-010-CH

Removal Procedure

Start By:

a. Remove the air inlet heater. Refer to Disassembly

g00618344

and Assembly, "Air Inlet Heater - Remove and

Illustration 74

Install".

1. Remove nut (1) in order to disconnect the wire

assembly from air inlet heater solenoid (3).

b. Remove the fuel filter base. Refer to Disassembly

Disconnect harness assembly (2).

and Assembly, "Fuel Filter Base - Remove and

Install".

2. Remove two bolts (4) and remove air inlet heater

solenoid (3).

g00618364

Illustration 76