Illustration 43 (Type I) 151-0858 Tube

TM 9-2320-312-24-2

Truck Engine

Disassembly and Assembly Section

NOTICE

Care must be taken to ensure that fluids are contained

during performance of inspection, maintenance, test-

ing, adjusting and repair of the product. Be prepared to

collect the fluid with suitable containers before open-

ing any compartment or disassembling any compo-

nent containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar

Tools and Shop Products Guide" for tools and supplies

suitable to collect and contain fluids on Caterpillar

products.

Dispose of all fluids according to local regulations and

mandates.

Note: If the engine is equipped with a 151-0858

Tube then proceed to 1. If the engine is equipped

with a 175-3236 Hose Assembly then go to 3.

g00706904

Illustration 44

(Type II) 175-3236 Hose Assembly

g00616113

Illustration 43

(Type I) 151-0858 Tube

g00769688

Illustration 45

1. Use Tool (A) in order to remove tube (1) and fuel

line (2).

3. Insert Tool (B) on the hose side of the rubber

boot on hose assembly (7). Push the rubber

2. Disconnect electrical plugs (3) and (4). Proceed

boot toward the fitting in order to remove hose

to Step 5.

assembly (7). Use Tool (A) to remove fuel line (2).

Note: If Tool (B) is not available, screwdrivers

that are medium sized may be used. Insert the

screwdrivers on each side of the rubber boot and

move the rubber boot toward the fitting. This will

allow the removal of hose assembly (7).

4. Disconnect electrical plug (4).