Test Step 7. Inspect the Connector Terminals

242

TM 9-2320-312-24-2

Troubleshooting Section

Verify that the repair eliminates the problem

by running the engine for several minutes and

by checking again for moisture. If moisture

reappears, the moisture is wicking into the

connector. Even if the moisture entry path is

repaired, it may be necessary to replace the

wires that have moisture. These wires may have

moisture that is trapped inside the insulation.

Verify that the repair eliminates the problem.

STOP.

Test Step 7. Inspect the Connector

Terminals

A. Verify that the terminals are not damaged. Verify

that the terminals are properly aligned in the

connector and verify that the terminals are

properly located in the connector.

Expected Result:

The terminals are properly aligned and the terminals

appear undamaged.

Results:

OK Proceed to Test Step 8.

Not OK

Repair: Repair the terminals and/or replace the

terminals, as required.

Verify that the repair eliminates the problem.

STOP.