Systems Operation Section

TM 9-2320-312-24-2

Systems Operation Section

i01147099

Engine Design

SMCS Code: 1000

g00290846

Illustration 1

Cylinder And Valve Location

(A) Exhaust valve.

(B) Inlet valve.

Bore ............................................ 110 mm (4.3 inch)

Stroke .......................................... 127 mm (5.0 inch)

Displacement .................................. 7.25 L (442 in 3 )

Number of cylinders ............................................... 6

Cylinder arrangement ..................................... In-line

Valves per cylinder ................................................. 3

In order to check the engine valve lash setting,

the engine must be cold and the engine must be

stopped. Engine valve lash settings

Inlet .................................. 0.38 mm (0.015 inch)

Exhaust ............................ 0.64 mm (0.025 inch)

Type of combustion .......................... Direct Injection

Firing Order ................................ 1 - 5 - 3 - 6 - 2 - 4

The crankshaft rotation is viewed from the

flywheel end of the engine. Crankshaft

rotation .......................................... counterclockwise

Note: The front end of the engine is opposite the

flywheel end of the engine. The left side of the

engine and the right side of the engine are viewed

from the flywheel end of the engine. The number

one cylinder is the front cylinder.