Air Inlet Heater

TM 9-2320-312-24-2

Specifications Section

i01147860

Air Inlet Heater

SMCS Code: 1090

g00292365

Illustration 61

Section view of the air inlet heater

(1) Air inlet heater

(2) Tighten the nuts to the following

torque. ......................... 8 1 Nm (71 9 lb in)

Note: During assembly of the air inlet heater to

the inlet manifold and the air inlet elbow, clean

the air inlet heater's joint faces with solvent. Apply

4C-9500 Quick Cure Primer to the joint faces. Allow

the primer to air dry for a minimum of three to five

minutes. Apply 1U-8846 Liquid Gasket to the joint

face and spread the gasket maker uniformly. The

heater must be assembled and tightened within ten

minutes.