PLACING CAB IN 90-DEGREE TILT POSITION - CONTINUED

TM 9-2320-312-24-1

PLACING CAB IN 90-DEGREE TILT POSITION - CONTINUED

0147 00

PLACING CAB IN 90-DEGREE TILT POSITION - CONTINUED

WARNING

This procedure must be performed using an overhead lift that has minimum 3-ton capacity. Overhead

lift MUST have braking capability. As cab is tilted to 90 degrees, cab is brought forward beyond its bal-

ance point. Without brakes, overhead lift could lose control of cab descent. Serious injury or death to

personnel and damage to equipment could result.

DO NOT use an A-frame as an overhead lift.

NOTE

Depending on available lift, it may be advisable to rig a chain for overhead lift to BOTH lifting lug at top of

cab and to bottom right lifting lug.

17.

Rig clevis to lifting lug (32) at top of cab. Attach hook of overhead lift to clevis.

18.

Rig clevis to lifting lug (33) at bottom left of cab.

BOTTOM RIGHT

LIFTING LUG

0147 00-7