PLACING CAB IN 90-DEGREE TILT POSITION - CONTINUED

TM 9-2320-312-24-1

PLACING CAB IN 90-DEGREE TILT POSITION - CONTINUED

0147 00

PLACING CAB IN 90-DEGREE TILT POSITION - CONTINUED

CAUTION

Failure to mark location of cab latch on frame bracket could cause latch to be incorrectly installed. Damage

to cab or latch could result if cab is lowered onto an improperly located latch.

Place witness marks to mark location of cab tilt latch (19) at frame bracket (20).

NOTE

Cab tilt latch MUST be removed at this time. In steps 11 and 12 that follow, cab will be lowered and cab

tilt cylinder disconnected. With cylinder disconnected, there will be no hydraulic pressure available to

unlock cab from latch, so that cab can be lifted free of frame.

Do NOT disconnect hydraulic hose from latch.

10.

Remove four nuts (21), screws (22), washers (23), and cab tilt latch (19) from frame bracket (20). Set latch aside out of

the way.

21,22,23