 |
|||
|
|
|||
|
Page Title:
PLACING CAB IN 90-DEGREE TILT POSITION |
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
PLACING CAB IN 90-DEGREE TILT POSITION - CONTINUED
0147 00
PLACING CAB IN 90-DEGREE TILT POSITION
1.
Ensure there is adequate clearance in front of cab to allow for 90-degree tilt.
WARNING
Ensure that tools and supplies are removed from cab and that cab doors are securely closed before tilting
cab. Failure to do so may result in serious injury or death to personnel.
2.
Ensure there are no loose items or tools inside cab. Close cab doors securely.
3.
Tilt cab to 45-degree position using cab tilt pump. Ensure cab is securely supported by safety prop (TM 9-2320-312-10).
4.
At front of tractor on left side, remove locknut (3) and clamp (2) from welded stud (4) to release two wiring harnesses
(1) and windshield washer hose (5) from attachment to frame. Discard locknut.
3,4
2
1
5
5.
On right side, remove nut (7), lockwasher (8), and release ground strap (6) from frame. Discard lockwasher.
6.
Remove locknut (10) and clamp (11) from welded stud (12) to release wiring harness (9) from attachment to frame. Dis-
card locknut.
6
7,8
9
10,11,12
0147 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals