 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
STEERING GEAR, DRAG LINK, AND PITMAN ARM REPLACEMENT - CONTINUED
0146 00
INSTALLATION - CONTINUED
NOTE
Perform bleeding procedure if steering gear has been disassembled or replaced.
10.
Bleed air from steering gear (Group 110 Commercial Service Manuals).
11.
Connect rear end of drag link (1) to steering arm (4) and install castle nut (3). Tighten castle nut to 500 lb-ft (678 Nm).
Install new cotter pin (2).
2
1
3
4
12.
Lubricate grease fittings at drag link ends and at lower steering column with GAA grease (WP 0009 00).
13.
If steering gear was disassembled or replaced, check steering gear relief plunger adjustment (Group 110 Commercial
Service Manuals).
14.
Lower cab (TM 9-2320-312-10).
END OF WORK PACKAGE
0146 00-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals