|
|
TM 9-2320-312-24-1
DRAINING AND FILLING HYDRAULIC RESERVOIR - CONTINUED
0129 00
DRAINING
WARNING
When servicing this vehicle, performing maintenance, or disposing of materials such as engine coolant,
transmission fluid, lubricants, battery acids or batteries, consult your unit/local hazardous waste disposal
center or safety office for local regulatory guidance. If further information is needed, please contact The
Army Environmental Hotline at 1-800-872-3845.
CAUTION
Wipe area clean around all hydraulic connections prior to disconnecting. Cap or plug all openings after dis-
connecting. Contamination of hydraulic system could result in equipment failure.
NOTE
Use a suitable container to capture draining hydraulic fluid. Dispose of fluid in accordance with local
policy and ordinances. Ensure all spills are cleaned up.
Total hydraulic system capacity is 15 gal (56.8 L).
Hydraulic reservoir alone has a capacity of 12 gal (45.2 L).
1.
Remove drain plug (2) from bottom of hydraulic reservoir (1) and allow hydraulic fluid to drain into a suitable container.
2.
Reinstall drain plug (2).
1
2
0129 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |