 |
|||
|
|
|||
|
Page Title:
CYLINDER LOCKING VALVE REMOVAL - CONTINUED |
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
HYDRAULIC SYSTEM VALVES REPLACEMENT - CONTINUED
0128 00
CYLINDER LOCKING VALVE REMOVAL - CONTINUED
NOTE
If damaged, perform steps 6 and 7 to remove mounting bracket.
6.
Remove nut (11) and clamp (17) from welded stud (12) and release drain valve cable pull (16) from mounting bracket
(4). Repeat to release air hose (10).
7.
Remove two nuts (13), flatwashers (14), bolts (15), and mounting bracket (4) from air reservoir mounting bracket (18).
4
10
11
12
18
16
17
13,14,15
13,14,15
CYLINDER LOCKING VALVE INSTALLATION
NOTE
Perform steps 1 and 2 to install mounting bracket.
1.
Install mounting bracket (4) to air reservoir mounting bracket (18) with two bolts (15), flatwashers (14), and nuts (13).
2.
Install clamp (17) with drain valve cable pull (16) to welded stud (12) on mounting bracket (4) with nut (11). Repeat to
secure air hose (10) to mounting bracket.
0128 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals