 |
|||
|
|
|||
|
Page Title:
24V ELECTRICAL CONNECTOR REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
TRAILER ELECTRICAL CONNECTORS REPLACEMENT - CONTINUED
0113 00
24V ELECTRICAL CONNECTOR REPLACEMENT
NOTE
Perform following steps to replace 24V connector at rear of vehicle or at rear of cab. Connector at rear
of vehicle is shown.
1.
Remove four locknuts (3), screws (4), and cover (1) from trailer electrical connector (2). Discard locknuts.
2.
Pull trailer electrical connector (2) outward from rear of vehicle for access to rear of connector.
1
2
3,4
3.
Disconnect wires of wiring harness (5) from rear of trailer electrical connector (2) in accordance with instructions
in WP 0120 00.
5
2
4.
Connect wires of wiring harness (5) to rear of trailer electrical connector (2) (WP 0120 00).
5.
Position trailer electrical connector (2) to rear of vehicle.
6.
Install trailer electrical connector (2) and cover (1) to vehicle with four screws (4) and new locknuts (3).
7.
Place battery disconnect switch in ON position.
0113 00-2
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals