 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
REMOTE START AND FAN CLUTCH SOLENOIDS REPLACEMENT - CONTINUED
0098 00
REMOTE START SOLENOID REMOVAL
NOTE
Remove and discard tiedown straps as necessary. Use new tiedown straps on installation.
1.
Remove four nuts (4) and lockwashers (5) and disconnect four wires (6) from solenoid (1). Discard lockwashers.
2.
Remove two locknuts (2), screws (3), and solenoid (1) from crossmember (7). Discard locknuts.
6
4,5
2,3
1
7
REMOTE START SOLENOID INSTALLATION
1.
Install solenoid (1) to crossmember (7) with two screws (3) and new locknuts (2).
2.
Connect four wires (6) to solenoid (1) with four new lockwashers (5) and nuts (4).
3.
Coat terminals of solenoid (1) with insulating varnish.
4.
Install transmission access cover (WP 0039 00).
5.
Place battery disconnect switch in ON position.
6.
Lower cab (TM 9-2320-312-10).
0098 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals