 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
STOWAGE COMPARTMENT REPLACEMENT - CONTINUED
0085 00
REMOVAL - CONTINUED
1
15
INSTALLATION
1.
If removed, install new weatherseal (15) to lip of stowage compartment (1).
2.
If removed, install hinge (10) with ten new rivets (11).
3.
Install two mounting brackets (2 and 9) to bottom of stowage compartment (1) with two bolts (4) and nuts (3). Do not
fully tighten nuts.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury to personnel.
4.
Install two mounting brackets (2 and 9), with stowage compartment (1), to right frame rail (14) with four bolts (13) and
nuts (12).
5.
Tighten four nuts (12) to 375 lb-ft (508 Nm).
6.
Tighten two nuts (3) to 105 lb-ft (142 Nm).
7.
Secure two clamps (7), with three air reservoir cable pulls (8), to two welded studs (6) of mounting bracket (2) with new
locknuts (5).
8.
Install air dryer and bracket (WP 0061 00).
9.
Lower fifth wheel (TM 9-2320-312-10).
END OF WORK PACKAGE
0085 00-3/4 Blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals