 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
LOAD SENSING GAUGE AND HOSES REPLACEMENT - CONTINUED
0084 00
REMOVAL - CONTINUED
12.
To gain access to remove hose (12), between bulkhead fitting and flow control valve (14), remove transmission access
cover (WP 0039 00).
NOTE
Note routing of hose and location of tiedown straps, hose clamps, and protective wire looms, to ensure cor-
rect installation.
13.
Trace hose (12) back to flow control valve (14). Remove tiedown straps and clamps securing hose in bundle under cab
and along left frame rail. Discard tiedown straps.
14.
Disconnect hose (12) from straight fitting (13) and remove hose from vehicle. Remove wire looms from hose.
14
13
12
INSTALLATION
NOTE
Perform steps 1 through 6 to install hose between bulkhead fitting at underside of cab and flow control
valve, located on right side of crossmember directly behind cab.
1.
Position wire looms onto hose (12) and position hose between points of installation.
2.
Connect hose (12) to straight fitting (13) at flow control valve (14).
0084 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals