LOAD SENSING GAUGE AND HOSES REPLACEMENT

TM 9-2320-312-24-1

LOAD SENSING GAUGE AND HOSES REPLACEMENT

0084 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Maintenance Level

Materials/Parts

Cap set, protective (Item 6, WP 0165 00)

Unit

Fluid, hydraulic, petroleum base (Item 25 or 26,

MAC Reference

WP 0165 00)

Rag, wiping (Item 51, WP 0165 00)

Group 160

Strap, tiedown (Item 57, WP 0165 00)

RPSTL Reference

References

Group 160, Figure 12

Tools and Special Tools

Equipment Condition

Tool kit, general mechanic's (Item 35, WP 0166 00)

Fifth wheel fully lowered (TM 9-2320-312-10)

Shop equipment, common no. 1 (Item 28, WP 0166

Engine shut down

WARNING

DO NOT disconnect or remove any hydraulic system line or fitting unless hydraulic system pressure

has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid under

pressure can penetrate the skin, causing serious injury.

Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids. If an acci-

dent occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed

within a few hours or gangrene may result.

At operating temperature, hydraulic fluid is hot. Allow hydraulic fluid to cool before disconnecting any

hydraulic lines. Failure to do so could result in serious burns.

Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning may

result in injury to personnel.