 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
ETHER COLD START SYSTEM MAINTENANCE - CONTINUED
0077 00
ETHER FUEL LINES REMOVAL
WARNING
Ether fuel is extremely flammable and toxic. DO NOT smoke and make sure you are in a well-ventilated
area away from heat, open flames or sparks. Wear eye protection. Avoid contact with skin and eyes and
avoid breathing ether fumes. If fluid enters or fumes irritate the eyes, wash immediately with large quantities
of clean water for 15 minutes. Seek medical attention immediately if ether is inhaled or causes eye irritation.
Failure to follow this warning may cause death or serious injury to personnel.
1.
Remove left-front mudflap (WP 0048 00).
2.
Disconnect ether fuel line (21) from elbow (22) on underside of solenoid valve (3).
3
22
21
NOTE
Note routing of ether line from solenoid valve to left side at top of engine.
3.
Trace ether fuel line (21) to tee (36) on left side of engine. Remove all tiedown straps and discard.
4.
Disconnect ether fuel line (21) from tee (36).
5.
Remove nut (27), screw (28), and clamp (29) from bracket (30) to release ether fuel line (31).
6.
Disconnect ether fuel line (31) from nozzle (32) and tee (36).
0077 00-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals