 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
REAR GLADHANDS REPLACEMENT - CONTINUED
0068 00
INSTALLATION
NOTE
To install gladhand preformed packing only, perform steps 7 and 8.
Apply a thin coat of pipe sealing compound to male fitting threads
1.
Install dummy coupling (7) to tailboard (5) with screw (6) and nut (11).
2.
Install gladhand (1) to fitting (3).
3.
Position ID plate (4) and fitting (3) with gladhand (1) through hole in tailboard (5).
4.
Install nut (10) on fitting (3).
5.
Install push-in fitting (9) to fitting (3).
6.
Connect air line (8) to push-in fitting (9).
7.
If removed, install new preformed packing (2) to gladhand (1).
8.
Stow dummy coupling (7) on gladhand (1).
9.
Start engine and fully pressurize air system (TM 9-2320-312-10).
10.
Check for air leaks: Apply a detergent and water solution to check for leaks at fittings. Shut down engine.
11.
Remove wheel blocks.
END OF WORK PACKAGE
0068 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals