 |
|||
|
|
|||
|
Page Title:
REAR TRACTOR PROTECTION VALVE REMOVAL |
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
AIRBRAKE SYSTEM VALVES REPLACEMENT - CONTINUED
0063 00
REAR TRACTOR PROTECTION VALVE REMOVAL
1.
Raise fifth wheel to access valve (12) at right rear of vehicle (TM 9-2320-312-10).
2.
Disconnect four air lines (8) from 45 elbows (9).
3.
Remove two nuts (13), lockwashers (14), screws (15), and valve (12) from bracket (10). Discard lockwashers.
4.
Remove four 45 elbows (9) and two bushings (11) from valve (12).
8
9
10
11
8
9
9
11
8
12
13,14,15
REAR TRACTOR PROTECTION VALVE INSTALLATION
NOTE
Apply a thin coat of pipe sealing compound to male threads of fittings before connections are made.
1.
Install two bushings (11) and four 45 elbows (9) to valve (12).
2.
Install valve (12) to bracket (10) with top EMERGENCY port facing up. Secure valve with two screws (15), new lock-
washers (14), and nuts (13).
NOTE
Ensure air line from rear emergency gladhand is connected to top EMERGENCY port of valve.
3.
Connect four air lines (8) to 45 elbows (9).
4.
Start engine and fully pressurize air system (TM 9-2320-312-10).
5.
Check for air leaks: Apply a detergent and water solution to check for leaks at air connections.
6.
Lower fifth wheel (TM 9-2320-312-10).
0063 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals