 |
|||
|
|
|||
|
Page Title:
CAB-MOUNTED TRACTOR PROTECTION VALVE REMOVAL - CONTINUED |
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
AIRBRAKE SYSTEM VALVES REPLACEMENT - CONTINUED
0063 00
CAB-MOUNTED TRACTOR PROTECTION VALVE REMOVAL - CONTINUED
2.
Disconnect two intervehicular hose assemblies (3) from valve (2) at right rear of cab.
3.
Disconnect two air lines (4) from elbows (7).
4.
Remove two nuts (5), lockwashers (6), screws (1), and valve (2) from cab. Discard lockwashers.
5.
Remove two elbows (7) from valve (2).
5,6
4
2
1
7
1
2
3
CAB-MOUNTED TRACTOR PROTECTION VALVE INSTALLATION
NOTE
Apply a thin coat of pipe sealing compound to male threads of fittings before connections are made.
1.
Install two elbows (7) to valve (2).
2.
Position valve (2) to right rear of cab, with top EMERGENCY port facing up. Secure valve with two screws (1), new
lockwashers (6), and nuts (5).
3.
Connect two air lines (4) to elbows (7).
NOTE
Ensure emergency intervehicular hose assembly is connected to top EMERGENCY port of valve.
4.
Connect two intervehicular hose assemblies (3) to valve (2).
5.
Lower cab (TM 9-2320-312-10).
6.
Start engine and fully pressurize air system (TM 9-2320-312-10).
7.
Check for air leaks: Tilt cab sufficiently to access valve (2). Apply a detergent and water solution to check for leaks at
air connections.
0063 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals