 |
|||
|
|
|||
|
Page Title:
|
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
TRANSMISSION OIL COOLER HOSES REPLACEMENT - CONTINUED
0029 00
VEHICLE WITH ARCTIC HEATER: INSTALLATION
NOTE
Install new tiedown straps after transmission oil cooler hoses and AC compressor are installed.
1.
Position transmission oil cooler hoses (22 and 25) to vehicle.
2.
Connect transmission oil cooler hose (22) to elbow (23) at radiator (8).
3.
Connect transmission oil cooler hose (25) to elbow (24).
4.
Route transmission oil cooler hoses (22 and 25) to transmission fluid warmer (20), mounted inside frame rail on right
side of vehicle. Connect hoses to fittings (19).
5.
Position transmission oil cooler lines (2 and 4) to vehicle and connect to fittings (19) at transmission fluid warmer (20).
6.
Route transmission oil cooler hoses (2 and 4) to transmission (1), securing to brackets along right side of vehicle with
clamps, bolts, and nuts.
7.
At rear of transmission (1), connect transmission oil cooler hose (2) to elbow (21).
8.
Connect transmission oil cooler hose (4) to elbow (5).
9.
Position AC compressor bracket (13), with AC compressor (18), to right side of engine (17).
10.
Install AC compressor bracket (13) with four washers (16), new lockwashers (15), and bolts (14).
17
13
14,15,16
18
11.
Install engine air cleaner and intake tubes (WP 0015 00).
12.
Refill transmission fluid (Group 070 Commercial Service Manuals).
13.
Start engine, operate transmission, and check for leaks (TM 9-2320-312-10).
END OF WORK PACKAGE
0029 00-9/10 Blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals