 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
FUEL TANK, RETAINING BANDS, AND BRACKETS REPLACEMENT - CONTINUED
0019 00
FUEL TANK REMOVAL
WARNING
When servicing this vehicle, performing maintenance, or disposing of materials such as engine coolant,
transmission fluid, lubricants, battery acids or batteries, consult your unit/local hazardous waste disposal
center or safety office for local regulatory guidance. If further information is needed, please contact The
Army Environmental Hotline at 1-800-872-3845.
CAUTION
Wipe area clean around all fuel connections prior to disconnecting. Cap or plug all openings after discon-
necting. Contamination of fuel system could result in equipment failure.
NOTE
Use a drain pan to capture any draining fuel. Dispose of fuel in accordance with local policy and ordi-
nances. Ensure all spills are cleaned up.
Fuel tank capacity is 50 gal (189.3 L).
Remove and discard tiedown straps as necessary. Use new tiedown straps on installation.
1.
Remove drain plug from underside of fuel tank (1) and drain fuel into a suitable container. Reinstall plug.
2.
Loosen hose clamp (6) and disconnect breather hose (7) from vent valve (5).
3.
Disconnect fuel supply hose (4) from adapter (3).
4.
Remove adapter (3) and check valve (2) from elbow (9).
5.
Remove vent valve (5) from fuel tank (1).
6.
Remove elbow (9) and reducer (8) from fuel tank (1).
5
4
3
7
2
6
1
REMOVED
IN INITIAL
SETUP
9
8
0019 00-2
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals