 |
|||
|
|
|||
|
Page Title:
SECONDARY FUEL FILTER REPLACEMENT - CONTINUED |
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
FUEL PRIMING PUMP ASSEMBLY/SECONDARY FUEL FILTER MAINTENANCE - CONTINUED
0017 00
SECONDARY FUEL FILTER REPLACEMENT - CONTINUED
1.
Use a strap wrench to remove fuel filter (12) from filter base (1). Discard filter.
2.
Clean gasket sealing surface of filter base (1). Ensure all old gasket material is removed.
3.
Apply clean fuel to gasket (13) of new fuel filter (12).
CAUTION
DO NOT fill fuel filter with fuel before installing. Fuel would not be filtered and could be contaminated.
Contaminated fuel will cause accelerated wear to fuel system parts.
4.
Install fuel filter (12) to filter base (1) until gasket (13) contacts base.
CAUTION
DO NOT use a strap wrench to tighten fuel filter. Overtightening will damage filter and cause fuel leaks.
5.
Tighten fuel filter (12) an additional full turn (360 degrees) by hand.
1
13
12
6.
Place battery disconnect switch in ON position.
CAUTION
DO NOT loosen fuel lines at fuel manifold when priming fuel system. Engine components may be damaged
and/or loss of priming pressure may occur when fuel lines are loosened.
7.
Prime fuel system (TM 9-2320-312-10).
8.
Start engine (TM 9-2320-312-10) and check for fuel leaks.
END OF WORK PACKAGE
0017 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals