FUEL PRIMING PUMP ASSEMBLY REMOVAL

TM 9-2320-312-24-1

FUEL PRIMING PUMP ASSEMBLY/SECONDARY FUEL FILTER MAINTENANCE - CONTINUED

0017 00

FUEL PRIMING PUMP ASSEMBLY REMOVAL

WARNING

When servicing this vehicle, performing maintenance, or disposing of materials such as engine coolant,

transmission fluid, lubricants, battery acids or batteries, consult your unit/local hazardous waste disposal

center or safety office for local regulatory guidance. If further information is needed, please contact The

Army Environmental Hotline at 1-800-872-3845.

CAUTION

Wipe area clean around all fuel connections prior to disconnecting. Cap or plug all openings after discon-

necting. Contamination of fuel system could result in equipment failure.

NOTE

Use a drain pan to capture any draining fuel. Dispose of fuel in accordance with local policy and ordi-

nances. Ensure all spills are cleaned up.

Tag fuel hoses to ensure correct installation.

Remove secondary fuel filter (Refer to Secondary Fuel Filter Replacement) and discard.

Disconnect outlet fuel hose (5) from fitting (6) at filter base (1).

Disconnect inlet fuel hose (4) from elbow (2).

Remove two nuts (7), screws (8), lockwashers (9), and fuel priming pump assembly (11) from cab tilt latch mounting

bracket (10). Discard lockwashers.

Remove elbow (2), o-ring seal (3), and fitting (6) from filter base (1). Discard o-ring seal.

2,3

7,8,9

0017 00-2