 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-10
WHEEL AND TIRE ASSEMBLY REPLACEMENT - CONTINUED
0014 00
INSTALLATION - CONTINUED
WARNING
Whenever wheel nuts require tightening or a wheel has been removed and replaced, wheel nuts must be
tightened to the required torque. Failure to follow this warning may result in serious injury to personnel
or damage to equipment.
NOTE
After 100 miles (161 km), retighten wheel nuts. Tighten again at 500 miles (805 km) and again at 1000
miles (1610 km). Have Unit Maintenance torque wheel nuts to proper torque.
Tightening pattern is identical for all wheel and tire assemblies.
8.
Tighten wheel nuts according to tightening pattern.
WHEEL NUT TIGHTENING PATTERN
9.
Have Unit Maintenance apply 500 lb-ft (678 Nm) torque.
10. Remove wheel blocks.
END OF WORK PACKAGE
0014 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals