 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-10
REFUELING AND FUEL SYSTEM PRIMING - CONTINUED
0013 00
REFUELING - CONTINUED
1.
Shut down engine.
2.
Wipe off dirt from on and around filler cap.
3.
Turn filler cap counterclockwise to remove cap.
4.
Fill tank with fuel to level stenciled on outside of tank.
5.
Install filler cap by turning cap clockwise.
FILLER
CAP
FUEL SYSTEM PRIMING
CAUTION
DO NOT loosen fuel lines at fuel manifold when priming fuel system. Engine components may be dam-
aged and/or loss of priming pressure may occur when fuel lines are loosened.
NOTE
If engine fails to start because yard tractor ran out of fuel, it may be necessary to prime fuel system.
1.
Rotate fuel priming pump plunger counterclockwise to open pump.
2.
Pull out and then push in pump plunger by hand until a strong pressure is felt.
3.
Turn plunger all the way clockwise after use.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals