Click here to make tpub.com your Home Page

Page Title: Table 3. Cab Tilt System Troubleshooting Procedures.
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2320-312-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
Table 3. Cab Tilt System Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. Cab Tilt System Operation is Erratic.
Notify Unit Maintenance.
Notify  Unit  Maintenance  if
2. Cab Will Not Tilt When Power Button on Cab
1. With ignition on, check that
voltmeter  indicates  vehicle
Tilt Pump is Pressed.
voltmeter on instrument panel
batteries are dead.
indicates adequate state of
charge.
2. Check cab tilt pump for loose
1. Connect electrical connector,
or  damaged  wires  and
if disconnected.
connectors.
2. If wires are loose or damaged,
notify Unit Maintenance.
If leaks are found, notify Unit
3. Check for hydraulic oil leaks at
Maintenance.
pump fittings and in hoses and
fittings
between
pump,
hydraulic cylinder, and cab tilt
latch.
Table 4. Electrical System Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. Batteries
Not
Charging,
1. Check for loose or broken
Notify Unit Maintenance.
Indicator in RED or YELLOW.
battery cables.
2. Shut  down  engine  and
If charging problem is not
perform
slave
starting
corrected by slave starting, notify
procedures (WP 0006 00).
Unit Maintenance.
1.1 Engine Cranks But Fails to Start
Attempt to start engine using
1. If engine does not start,
emergency start switch (WP
perform
slave
starting
procedures (WP 0006 00).
2. If engine still fails to start,
notify Unit Maintenance.
Place switch(es) in ON position.
2. One  or  More
Lighting
Systems
Not
1. Check position of switch(es).
Connect
intervehicular
Working.
If vehicle is coupled to trailer
electrical cable.
and problem is with trailer
lighting
system,
check
intervehicular electrical cable
connection.
2. Check if applicable circuit
Push in to reset circuit breaker.
breaker on instrument panel
is tripped.
3. Notify Unit Maintenance to
perform
trailer
trouble-
shooting.
Change 1

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business