 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-10
OPERATION UNDER UNUSUAL CONDITIONS - CONTINUED
0006 00
SLAVE START TRACTOR - CONTINUED
17. Shut down "live" vehicle and disconnect NATO slave cable from both vehicles.
18. Place battery disconnect switch on "dead" vehicle in ON position.
19. Turn ignition switch to START position and start vehicle.
NOTE
With engine at idle speed, check instrument panel voltmeter to ensure voltmeter indicator is in GREEN area.
If voltmeter indicator is NOT in GREEN area, shut down engine and perform troubleshooting (WP 0009
TOWING TRACTOR
1.
General.
a.
Notify Unit Maintenance to send recovery vehicle. Tools will also be required to remove propshaft, if towing with all
wheels or rear wheels on the ground.
b.
Refer to FM 21-305 for general guidelines on vehicle recovery and use of warning kits and signals.
CAUTION
Propshaft must be removed before towing tractor with all wheels or rear wheels on the ground. Failure to
follow this caution may result in transmission damage.
c.
When towing tractor with all wheels or rear wheels on ground, have Unit Maintenance remove propshaft.
d.
When rear axle of tractor being towed is lifted off the ground, secure steering wheel to maintain straight-ahead posi-
tion.
2.
Towing Procedures.
WARNING
DO NOT lift or tow vehicle by attaching chains directly to the bumper. Failure to follow this warning may
result in injury to personnel or damage to equipment.
Brakes will be released when air is applied to a disabled vehicle. DO NOT connect air lines to a disabled
vehicle without first blocking wheels and connecting tow bar between vehicles. Failure to follow this warn-
ing could result in death or injury to personnel and damage to equipment.
0006 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals