|
| |
TM 9-2320-304-14&P
5-241
Direct Support and General Support Maintenance (Cont)
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
NOTE
There are two pin bracket assemblies.
Both are installed the same way. Right
side is shown.
(79) Apply sealing compound to threads of
four screws (116).
(80) Install four screws (116) and pin
bracket (117) on arm assembly (113).
WARNING
Use care when installing snap rings and
retaining rings. Snap rings and retaining
rings are under spring tension and can act
as projectiles when released and can cause
severe injury.
NOTE
Beveled edge of spacer faces bearing in
short strut.
(81) Install spacer (118), short strut (119),
pivot pin (120), and retaining ring (121)
on pin bracket (117).
Change 1
|
