|
| |
TM 9-2320-304-14&P
5-238
Direct Support and General Support Maintenance (Cont)
5-43. CONTAINER HANDLING UNIT (CHU) KIT INSTALLATION (CONT).
WARNING
Use care when installing snap rings and
retaining rings. Snap rings and retaining
rings are under spring tension and can act
as projectiles when released and can cause
severe injury.
NOTE
Beveled edge of spacer faces bearing in
long strut.
(64)
Install long strut (97) and spacer (98) in
bracket assembly (87) with pin (99) and
retaining ring (100).
(65) Install wire rope (101) through swage
sleeve (102), pin (103), and back into
swage sleeve. Crimp swage sleeve.
(66) Install wire rope (101) through swage
sleeve (104), cotter pin (105) and back
into swage sleeve (104). Crimp swage
sleeve.
(67) Install cushion clip (106) on wire
rope (101).
(68) Install cushion clip (106) on long
strut (97) with screw (107).
Change 1
|
